SOS PRODUCT COMPANY, INC. -- CUTTING OIL  -- 9150-00F032744
<pre>=====================  Product Identification  =====================

Product ID:CUTTING OIL
MSDS Date:01/01/1993
FSC:9150
NIIN:00F032744
=== Responsible Party ===
Company Name:SOS PRODUCT COMPANY, INC.
Address:4TH AND RAILROAD ST
City:EAST GREENVILE
State:PA
ZIP:18041
Country:US
Info Phone Num:(215) 679-6263
Emergency Phone Num:(215) 679-6262
CAGE:SOSPR
=== Contractor Identification ===
Company Name:SOS PRODUCT COMPANY, INC.
Address:4TH AND RAILROAD ST
City:EAST GREENVILE
State:PA
ZIP:18041
Country:US
Phone:(215) 679-6263
CAGE:SOSPR

=============  Composition/Information on Ingredients  =============

Ingred Name:PETROLEUM OIL, HYDROTREATED HEAVY NAPHTHENIC DISTILLATE
    (PETROLEUM), PETROLEUM DISTILLATES, MINERAL OIL (SEVERE)
CAS:64742-52-5
RTECS #:PY8035001
Fraction by Wt: 95%

Ingred Name:ANIMAL FATTY OIL	 *93-4*
CAS:8016-28-2
Fraction by Wt: >5%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: MODERATE IRRITATION. EYES:
    IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: DEFATTER.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR IF BREATHING STOPS.
    INGESTION: DON'T INDUCE VOMITING. SKIN: FLUSH W/PLENTY OF WATER &
    SOAP. EYES: FLUSH W/PLENTY OF WATER. OBTAIN MEDICAL ATTENTION IN
    ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:300F
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:DRY CHEMICAL, CO2, FOAM
Fire Fighting Procedures:TREAT AS PETROLEUM FIRE. WEAR AIR-SUPPLIED
    BREATHING APPARATUS IN CLOSED AREAS.
Unusual Fire/Explosion Hazard:COMBUSTIBLE AT HIGH TEMPERATURES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:STOP LEAK IF POSSIBLE. DIKE & ABSORB W/INERT
    MATERIAL SUCH AS OIL ABSORBER. SWEEP, PICK-UP & REMOVE. PREVENT ANY
    SPREAD OF SPILL.

======================	Handling and Storage  ======================

Other Precautions:DON'T BREATH OIL MISTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF OIL MIST IS CREATED, USE APPROVED MASK FOR
    OIL MISTS.
Ventilation:LOCAL EXHAUST TO MAINTAIN TLV
Protective Gloves:RUBBER, OIL RESISTANT
Eye Protection:SAFETY GOGGLES
Work Hygienic Practices:WASH THOROUGHLY AFTER USING W/SOAP & WATER.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:500-700F
Vapor Pres:0.1
Vapor Density:>10
Spec Gravity:0.9
Evaporation Rate &amp; Reference:(WATER = 1): <1
Appearance and Odor:DARK AMBER LIQUID W/PETROLEUM ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:CO, CO2, REACTIVE HYDROCARBONS

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF MATERIAL AT PROPER WASTE IN
    ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.